300-435 Exam Practice Questions prepared by Cisco Professionals
Use Valid New 300-435 Questions - Top choice Help You Gain Success
Suitable Study Guides for Cisco 300-435 Exam
So far, Cisco is yet to release an official book for their 300-435 exam. Still, there are splendid guides that address the concepts relating to it. One of them is the Programming and Automating Cisco Networks guide which explores programmability in addition to automation within the data center, WAN, and campus. The authors are Jason Gooley and Ryan Tischer. These experts have ensured the content pays attention to subject matters that include WAN technologies, campus, tools for automation as well as operation, the management of advanced WANs using ConfD, NetConfg/Yang, and more. One also comes by knowledge on making use of advanced tools for Cisco with industry-recognized programming languages like JSON, Python, and Linux.
The Network Programmability and Automation book is another one that points to the subject matter that is associated with the Cisco 300-435 test. This guide authored by three network experts including Jason Edelman, Matt Oswalt, and Scott S. Lowe gives a general coverage of subjects that systems administrators as well as network engineers will find helpful. What is more, the guide is practical and demonstrates to engineers how they can use varied tools and technologies that include Python, Linux, and JSON in automating their systems. Plus, it provides ways in which specialists can simplify tasks, including configuration, maintenance, operation of networking equipment, services, tools, and connectivity. Also, to cover is the matter about what role the APIs play in the automation of networks.
More Details for 300-435 Test
Besides the two certificates already mentioned, the Cisco 300-435 evaluation also leads to the Cisco Certified DevNet Specialist - Enterprise Automation and Programmability. This is an affirmation of your effort in passing only 300-435 exam. So, it is issued specifically for the ENAUTO test. Regarding the CCNP Enterprise, the initial test is 350-401, which relates to core technologies. For the Cisco Certified DevNet Professional, there is the Cisco 350-901 exam that has to be accomplished first.
The Cisco 300-435 exam is intended for IT professionals with experience in Cisco enterprise solutions and programming concepts. Candidates for this exam should have a good understanding of network protocols, network infrastructure, and network security. They should also have experience with programming languages such as Python, and have an understanding of software development methodologies such as Agile and DevOps. Passing this exam requires a combination of practical experience and theoretical knowledge, and demonstrates an individual's ability to design and implement complex Cisco enterprise solutions using automation and programming techniques.
NEW QUESTION # 15
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. A portion of the response is shown in the exhibit.
Which module name corresponds to the YANG model referenced in the request?
- A. ietf-interfaces:ietf-ipv4
- B. iana-if-type:ethernetCsmacd
- C. ietf-interfaces:interfaces
- D. ietf-interfaces
Answer: C
NEW QUESTION # 16
An engineer is configuring a new mobility anchor for a WLAN on the CLI with the config wlan mobility anchor add 3 10.10.10.10 command, but the command is failing. Which two conditions must be met to be able to enter this command? (Choose two.)
- A. The indicated WLAN ID must be present on the controller.
- B. The anchor controller IP address must be within the management interface subnet.
- C. The anchor controller must be in the same mobility group.
- D. The WLAN ID must be enabled.
- E. The mobility group keepalive must be configured.
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION # 17
Refer to the exhibit. A Python script is used to configure a Cisco IOS XE router. The Loopback2 interface currently has a description of Management2 and an IP address/netmask of 10.222.34.22/32. What is the result of executing the script?
- A. The router rejects all commands and the configuration remains the same.
- B. The interface description is removed from the configuration.
- C. The interface is removed from the configuration.
- D. The interface description remains the same.
Answer: D
NEW QUESTION # 18
Refer to the exhibit.
The goal is to write a Python script to automatically send a message to an external messaging application when a rogue AP is detected on the network. The message should include the broadcast SSID that is in the alert. A function called "send_to_application" is created, and this is the declaration:
send_to_application(message)
The exhibit also shows the data that is received by the application and stored in the variable return_val. Which Python code completes the task?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: B
Explanation:
For number in range value is required for the application to send the alert. Bssids are also included.
NEW QUESTION # 19
Fill in the blanks to complete this API request against the Cisco SD_WAN vManage Statistics API, which specified a deviceId of 260faff9-2d31-4312-cf96-143b46db0211, a local-color of biz-internet, and a remote- color of gold.
Answer:
Explanation:
deviceId=, &local-color=, remote-color=
NEW QUESTION # 20
Fill in the blanks to complete this API request against the Cisco SD_WAN vManage Statistics API, which specified a deviceId of 260faff9-2d31-4312-cf96-143b46db0211, a local-color of biz-internet, and a remote- color of gold.
Answer:
Explanation:
deviceId= , &local-color= , &remote-color=
Reference:
https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/ vManage_REST_APIs/Real-Time_Monitoring_APIs/Application-Aware_Routing#Statistics
NEW QUESTION # 21
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 22
Which REST endpoint is used to create a Cisco Meraki network?
- A. PATCH /networks{networkId}
- B. POST /organizations/{organizationId}/networks
- C. POST /networks{networkId}
- D. PUT /organizations/{organizationId}/networks
Answer: B
NEW QUESTION # 23
Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What are the two YANG data nodes and modules referenced in the response? (Choose two.)
- A. ipv4 is a container defined in the ietf-ip module
- B. interface has the YANG data node type of container
- C. description is a key field defined in the interface list
- D. address is a container defined in the ietf-interfaces module
- E. The ethernetCsmacd type is imported from the iana-if-type module
Answer: C,E
NEW QUESTION # 24
Refer to the exhibit.
Which type of YANG container is described by the JSON instance provided?
- A. active
- B. interface-configurations
- C. interface-name
- D. description
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
NEW QUESTION # 25
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Automate APIs and Protocols
Explanation/Reference:
Explanation:
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION # 26
Refer to the exhibit.
How many YANG models does the NETCONF <get> operation interact with?
- A. one
- B. two
- C. four
- D. three
Answer: B
Explanation:
:
The get operation tag is at the beginning of the document. It interacted only with NTP and its related services. There get operation interacted only with one model.
NEW QUESTION # 27
What is an advantage of software-defined networks as compared to traditional networks?
- A. They enable older hardware to be repurposed without an investment in new infrastructure.
- B. They reduce complexity by coupling the control and the data plane.
- C. They simplify operations by creating a concrete copy of the network.
- D. They deliver a distributed management architecture that provides better resilience to errors.
Answer: D
NEW QUESTION # 28
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shows in the exhibit. what is the YANG data node that is referenced in the response?
- A. Route is a leaf list
- B. Routing-instance is a container
- C. Static-router is a list
- D. Static-routes is a container
Answer: D
NEW QUESTION # 29
Which statement is true for Cisco IOS XE Software?
- A. RESTCONF supports XML and NETCONF supports JSON and XML.
- B. RESTCONF and NETCONF supports JSON and XML.
- C. RESTCONF supports XML and NETCONF supports JSON.
- D. RESTCONF supports JSON and XML and NETCONF supports XML.
Answer: D
Explanation:
Section: Automate APIs and Protocols
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/169/ b_169_programmability_cg/restconf_programmable_interface.html
NEW QUESTION # 30
Refer to the exhibit.
Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)
- A. timezone
- B. type
- C. tags
- D. disableMyMerakiCom
- E. organizationId
Answer: B,E
Explanation:
Explanation
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.
NEW QUESTION # 31
Refer to the exhibit.
Which NETCONF protocol operation is used to interact with the YANG model?
- A. <get>
- B. <get-config>
- C. <copy-config>
- D. <edit-config>
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs-r6-4/programmability/configuration/guide/b-programmability-cg-crs-64x.pdf
NEW QUESTION # 32
An engineer needs to create a new network using the Meraki API. Which HTTP action to the URL https:// api.meraki.com/api/v0/organizations/<new_org_id>/networks will result in a 201 response code?
- A. GET
- B. PUT
- C. POST
- D. ADD
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
A template is provided to a junior developer to automate the creation of a network on the
Meraki dashboard. The new network needs to have the id 123456789 and support only wired network
connections. What type needs to be added to the API?
- A. systemsManager
- B. appliance
- C. wireless
- D. switch
Answer: B
NEW QUESTION # 34
Refer to the exhibit.
A Python script has been created that calls the Cisco SD-WAN vManage Device Inventory API to get the list of vEdges. The JSON data that returns to a Python dictionary has been converted and assigned to a variable named "d". A portion of the JSON is shown in the exhibit. Which code will complete the expression hostname= to access the hostname?
- A. d["data"][0]["host-name"]
- B. d["host-name"]["data"]{"0"}
- C. d("data")[0]("host-name")
- D. d[data][0][host-name]
Answer: A
Explanation:
Explanation
The double-quotations are a necessary syntax of Python. And for the json portion doesnt use parentheses. It always uses brackets. d["data"][0]["host-name"] is the only logical answer.
NEW QUESTION # 35
While planning a new WAN design, an engineering team is asked to use software defined networking as part of the wide area network strategy. Which SDN controller allows for applications iWAN control, Plug and Play and Enterprise Service Automation?
- A. Wide Area Application Service
- B. Enterprise NFV
- C. APIC
- D. APIC-EM
Answer: D
Explanation:
Explanation/Reference:
References:
NEW QUESTION # 36
What is a capability of Cisco SD-WAN vManage Certificate Management API?
- A. deletes existing installed certificates
- B. creates certificate signing requests
- C. distributes the root certificate to client devices
- D. generates SSL certificates
Answer: B
NEW QUESTION # 37
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. yang +json
- B. yang.data+json
- C. json
- D. yang-data+json
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
NEW QUESTION # 38
Refer to the exhibit.
Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)
- A. timezone
- B. type
- C. tags
- D. disableMyMerakiCom
- E. organizationId
Answer: B,E
Explanation:
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.
NEW QUESTION # 39
......
300-435 Exam Practice Materials Collection: https://actualtests.real4prep.com/300-435-exam.html