300-510 Dumps 2022 - New Cisco 300-510 Exam Questions
Free 300-510 Braindumps Download Updated on Jan 23, 2022 with 104 Questions
Difficulty in Writing Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
The Implementation of the Cisco Service Provider VPN Services (300-510) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-510 SPRI practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. Real4Prep have the most up to date 300-510 SPRI dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
NEW QUESTION 21
What is the role of segment routing mapping server?
- A. It reads and translates remotely received SIDs from other mapping servers to create SID mapping entries.
- B. It advertises a local SID mapping policy to all the mapping clients.
- C. It selects multiple mapping entries to create overlapping active mapping policies.
- D. It works with IGP instances to calculate the prefix-SIDs in the absence of a mapping policy.
Answer: B
NEW QUESTION 22
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/1 interface provides the alternate path
- B. TenGigE0/2 interface provides the alternate path
- C. A primary path must be manually installed
- D. A backup path must be statically installed
Answer: B
NEW QUESTION 23
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured for graceful restart
- B. It must be configured with send labels
- C. It must be configured with PIC edge
- D. It must be configured with a route reflector
Answer: B
NEW QUESTION 24
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing can be enabled only globally
- B. Segment routing must first be enabled globally and then under the routing process
- C. Segment routing must first be enabled under then routing process and then globally
- D. Segment routing can be enabled only under the routing process
Answer: B
NEW QUESTION 25
Refer to the exhibit.
An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?
- A. The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
- B. The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
- C. The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
- D. The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
Answer: B
NEW QUESTION 26 
Refer to the exhibit. After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have different IS-types.
- B. The two routers have the same network ID.
- C. The two routers cannot authenticate with one another.
- D. The two routers have the same area ID.
Answer: B
NEW QUESTION 27
Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)
- A. Each ISP must configure its network to use PIM-DM.
- B. Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.
- C. Each ISP must replace its RP assignment with a global RP.
- D. Each ISP must dedicate a single router to handle multicast traffic between providers.
- E. Each ISP must support intradomain multicast routing.
Answer: B,E
NEW QUESTION 28
Which output from the show isis interface command helps an engineer troubleshoot an IS-IS adjacency problem on a Cisco IOS-XR platform?
- A. metric
- B. circuit type
- C. priority
- D. hello interval
Answer: D
NEW QUESTION 29
What is used by SR-TE to steer traffic through the network?
- A. path policy
- B. shortest path calculated by IGP
- C. explicit maps
- D. dynamic rules
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_0100.html
NEW QUESTION 30
Refer to the exhibit.
Why is neighbor 10.1.5.5 stuck in "2WAY" state?
- A. Router ID 10.1.5.5 is not reachable from R2
- B. OSPF authentication has failed between R2 and 10.1.5.5
- C. It is an expected behavior when OSPF network type is broadcast
- D. OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5
Answer: C
NEW QUESTION 31
Refer to the exhibits.
A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1. Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/2 - forwarding label 24002
- B. PE1 - Gi0/0/0/3 - forwarding label 24001
- C. PE1 - Gi0/0/0/3 - forwarding label 24002
- D. PE1 - Gi0/0/0/2 - forwarding label 24001
Answer: B
NEW QUESTION 32
Refer to the exhibit.
Which tree does multicast traffic follow?
- A. shared tree
- B. MDT voice
- C. source tree
- D. MDT default
Answer: D
NEW QUESTION 33
Which statement about BFD on Cisco IOS XR Software is true?
- A. Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.
- B. Cisco IOS XR Software does not support BFD multihop for IPv4.
- C. BFD is not compatible between Cisco IOS XR and Cisco IOS Software.
- D. Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-3/routing/configuration/ guide/b-routing-cg-asr9000-63x/b-routing-cg-asr9000-63x_chapter_0100.html
NEW QUESTION 34
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 35
Refer to the exhibit.
The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?
- A. 192. 168.1.2
- B. 192.168.3.6
- C. 192.168.3.2
- D. 192.168.1.6
Answer: A
NEW QUESTION 36
Refer to the exhibit.
Routers within the cluster are not receiving the desired prefixes. What must be done to fix the issue?
- A. Clients in that cluster must have full mesh connectivity between eBGP peers.
- B. No client-to-client must be disabled.
- C. Clients in that cluster must have full mesh connectivity between iBGP peers.
- D. No client-to-client reflection must be enabled.
Answer: C
NEW QUESTION 37
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Sofware?
- A. ip pim bidir-enable
- B. ipv4 pim bidir-enable
- C. ip multicast-routing
- D. ip pim bidir
Answer: A
NEW QUESTION 38
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- D. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
Answer: C
NEW QUESTION 39
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 40
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/1 interface provides the alternate path
- B. TenGigE0/2 interface provides the alternate path
- C. A primary path must be manually installed
- D. A backup path must be statically installed
Answer: B
NEW QUESTION 41
Refer to the exhibit.
Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)
- A. The two routers are in different subnets
- B. The two routers are in the same area
- C. The two routers are in different areas
- D. The two routers have the same network ID
- E. The two routers have password mismatch issues
Answer: A,C
NEW QUESTION 42 
Refer to the exhibit. Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured for graceful restart
- B. It must be configured with send labels
- C. It must be configured with PIC edge
- D. It must be configured with a route reflector
Answer: B
NEW QUESTION 43
An engineer is working to implement segment routing protocol on the customer's core network. Which step should the engineer take before the segment routing is enabled and is running with BGP?
- A. Explicit-null must be configured for all neighbors.
- B. Segment routing must be configured with ISIS.
- C. MPLS must be configured.
- D. Segment routing must be configured with EIGRP.
Answer: C
NEW QUESTION 44
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- B. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- C. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- D. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
Answer: D
NEW QUESTION 45
......
For more info read reference:
Cisco 300-510 Exam Practice Test Questions: https://actualtests.real4prep.com/300-510-exam.html